# Displaying Towing Charges on a Violation

Depending on your policy, some institutions tow vehicles and some do not. If you do charge a fee for towing, this can be shown on the violation you give to the parker. Even though a towing cost may not apply in all cases, some organizations have it display a **$0.00** value just as a reminder that a vehicle could possibly be towed. This is a setting that can be enabled on the handheld unit. This article will walk through the process of enabling Tow Charges to print on a Violation.

1. To enable this setting, go to **System Settings** on the handheld units. By default, the setting is disabled. This means that no Towing charges would print.

[![image.png](https://opscom.wiki/uploads/images/gallery/2024-05/scaled-1680-/a9Yimage.png)](https://opscom.wiki/uploads/images/gallery/2024-05/a9Yimage.png)

This is an example of the Violation with **no** Towing Charge:

[![image.png](https://opscom.wiki/uploads/images/gallery/2024-05/scaled-1680-/7frimage.png)](https://opscom.wiki/uploads/images/gallery/2024-05/7frimage.png)

2\. Enable the **Show $0.00 Towing Charge** checkbox and the **$0.00** cost will appear on the ticket.

[![image.png](https://opscom.wiki/uploads/images/gallery/2024-05/scaled-1680-/IaDimage.png)](https://opscom.wiki/uploads/images/gallery/2024-05/IaDimage.png)

This is an example of the Violation with **a $0.00** Towing Charge:

[![image.png](https://opscom.wiki/uploads/images/gallery/2024-05/scaled-1680-/dP5image.png)](https://opscom.wiki/uploads/images/gallery/2024-05/dP5image.png)

Please Note:

It is important to note that if a towing charge was actually applied to the violation, in all cases, the towing charge would appear regardless of this setting.