LPR Scanning Information

Interpreting LPR flags 

 Here we have a typical LPR display. Notice the last read plate came from the right side Camera (indicated by the orange arrow beside the plate image) 

 

 Running Scan Total 

 The running total of how many reads you have done in a session is located on the right, just above the read list.  In this case we have 30 reads total. 

 

 Visual Indicators During Scanning 

 Plates in Violation  are indicated by a red flag. 

 

 Valid Plates are flagged as green. Valid reads will list on the handheld unit but will not be chalked or passed into the system as part of the LPR events report. 

 

 Plates Chalked 

 Reads that are still in the grace period configured in your system will be indicated by an orange flag. 

 Toggle PL8-RDR Scanning 

 When editing a plate read the system will go into offline mode.  This is indicated by the green button shown below changing to red. To continue scanning plates be sure to engage the ON button, make sure it's green before continuing.  

 

 Scan for Plates-of-Interest Only 

 Alert-only scanning can be done by selecting the toggle at the top of the PL8RDR LPR Scanning panel. 

 Once selected: 

 

 no permit validation will be performed 

 vehicles will continue to be chalked 

 alert notifications will be presented if a vehicle of interest is "seen"