# Migrate from Legacy Handheld to OPSCOM Enforce Handheld App

<p class="callout warning">Before you say goodbye to the old app on any device, make sure to complete a full sync so all your tickets are safely pushed up to the Admin portal.</p>

1. **DOWNLOAD THE APP**
    
    
    - Tap the Play Store app on the device's main screen to open it.
    - Tap the search bar and type **OPSCOM Enforce** or **OPSCOM**.
    - Tap the **OPSCOM Enforce** application icon from the search results to access the store page.
    - Tap the Install button to begin the download process.
    - Tap Accept on the settings pop-up window to grant the application access to required device integrations.
    - Tap the Open button directly within the store once the installation completes, or return to the device's home screen and tap the newly created OPSCOM app shortcut.

![](https://opscom.wiki/uploads/images/gallery/2026-09/embedded-image-pxjhvcmf.png)

1. **REGISTER THE APP (ADMIN)**
    
    
    - Login to the OPSCOM Admin Portal.
    - Under Violations, select Handheld Devices.

![](https://opscom.wiki/uploads/images/gallery/2026-09/embedded-image-h8e0stmc.png)

1. - Click on the **Add New Device**
    - Fill in the UUID from the running Enforce App(see screenshot below) -&gt; select **Production Server** for Sync With -&gt; Give your device a name and leave the rest of the settings.

![](https://opscom.wiki/uploads/images/gallery/2026-09/embedded-image-p7zch0ct.png)

1. - Click on Add Device to register the device.

![](https://opscom.wiki/uploads/images/gallery/2026-09/embedded-image-lk6azqyz.png)

1. **COMPLETE THE APP CONFIGURATIONS (Back in the running Enforce app)**
    
    
    - Click on Refresh button to sync and complete the configuration.
    - Accept the permissions and login.

![](https://opscom.wiki/uploads/images/gallery/2026-09/embedded-image-ypsue1tg.png)

**HANDHELD CHALKING AND LPR CONFIGURATION**

Click on the hamburger menu ![](https://opscom.wiki/uploads/images/gallery/2026-09/embedded-image-s12pbmoh.png) at the top left corner and select App Settings.

![](https://opscom.wiki/uploads/images/gallery/2026-09/embedded-image-9bmnes4r.png)

1. Enable Auto-Chalk
    
    
    - Under Violations and Chalking, check the Auto-Chalk Vehicles.
2. Add the LPR cameras 
    - Under the LPR Camera Settings, add the IP addresses of the cameras.
    - Use Scan Network or Enter Manually to add the IP address of the cameras (Eg. 10.42.0.11, 10.42.0.12, etc.).
    - Select the direction of the camera (Left or Right).


![](https://opscom.wiki/uploads/images/gallery/2026-09/embedded-image-kaaxia28.png)

![](https://opscom.wiki/uploads/images/gallery/2026-09/embedded-image-jvgh8zvm.png)

![](https://opscom.wiki/uploads/images/gallery/2026-09/embedded-image-anmex07o.png)

**TEST THE LPR SCANNING**

- Select the LPR SCANNING from the home icons.

![](https://opscom.wiki/uploads/images/gallery/2026-09/embedded-image-wqkh53yb.png)

1. - Confirm the connection status and start scanning some plates.

![](https://opscom.wiki/uploads/images/gallery/2026-09/embedded-image-pgsgqt7j.png)