Skip to main content

Migrate from Legacy Handheld to OPSCOM Enforce Handheld

Before you say goodbye to the old app on any device, make sure to complete a full sync so all your tickets are safely pushed up to the Admin portal

  1. DOWNLOAD THE APP

    • Tap the Play Store app on the device's main screen to open it.
    • Tap the search bar and type OPSCOM Enforce or OPSCOM.
    • Tap the OPSCOM Enforce application icon from the search results to access the store page.
    • Tap the Install button to begin the download process.
    • Tap Accept on the settings pop-up window to grant the application access to required device integrations.
    • Tap the Open button directly within the store once the installation completes, or return to the device's home screen and tap the newly created OPSCOM app shortcut.

  1. REGISTER THE APP (ADMIN)

    • Login to the Admin Portal 
    • Under Violations, select Handheld Devices

    • Click on the Add New Device 

    • Fill in the UUID(from the running Enforce App) -> select Production Server for Sync Width -> Give your device a name and leave the rest settings

    • Click on Add Device to register the device

  1. COMPLETE THE APP CONFIGURATIONS(Back in the running Enforce app)

    • Click on Refresh button to sync and complete the configuration

    • Accept the permissions and login

HANDHELD CHALKING AND LPR CONFIGURATION

Click on the hamburger menu at the top left corner and select App Settings

  1. Enable Auto-Chalk

    • Under Violations and Chalking, check the Auto-Chalk Vehicles

  2. Add the LPR cameras

    • Under the LPR Camera Settings, add the IP addresses of the cameras

    • Use Scan Network or Enter Manually to add the IP address of the cameras (Eg. 10.42.0.11, 10.42.0.12, etc)

    • Select the direction of the camera(Left or Right)

    • Select the LPR SCANNING from the home icons


      • Confirm the connection status and start scanning some plates

    Back to top