Part 3: Handheld Set-Up
- Select the OPS-COM app on your device.
- Log in with your OPS-COM admin username and password.
Information and Training 📚
1. The OPS-COM Handheld App
Once your hardware is set up, you'll use the OPS-COM Parking Enforcement app on a handheld device.
- Connecting to the PL8RDR Network: The PL8RDR broadcasts a Wi-Fi network named
pl8rdr.opscom
. You'll need to connect your device to this network to scan plates. The password for the network isT0maha3k
. - App Login: Select the OPS-COM Parking Enforcement app on your device and log in using your OPS-COM admin username and password.
- Searching for Vehicles: You can search for vehicles using three methods: typing the plate number, using voice command, or using the LPR camera with OCR technology.
- E-Chalking (Virtual Chalking): This feature electronically tracks how long a vehicle has been parked. It creates a time-stamped image of the license plate and the entire car, which can be attached to a violation. The chalked image is saved with the violation unless you delete it.
- Issuing Violations: You can issue violations to a person or a vehicle. The system will perform a secondary check and issue a warning if a plate has a valid permit, but it will still allow you to proceed with the violation at your discretion.