LPR Cameras
LPR Camera Information
What is LPR?
PL8RDR Hardware Connections
In the field, only the cellular antenna, wifi antenna, and power connectors are used. ...
Connecting to the PL8RDR
In order to scan plates, the PL8RDR computer will need to be connected to a handheld device runni...
PL8RDR Signal Strength
Signal Strength The PL8RDR is a proxy/bridge to the internet through WIFI or your cellular provi...
Tattile LPR Camera
Powering a Tattile Mobile LPR Camera
Standard Hardware There are several pieces of gear that comprise the OPS-COM LPR system. A typic...
Configure Tattile LPR Camera
Connecting Wirelessly The first step is to connect to your PL8RDR device via wireless connection...
Connect to a Tattile Mobile Camera
First Time Connection Power up the camera and give it a few minutes to fully boot up. At that p...
ANPR Setup Checklist -Tattile
Initial Setup Wired Wireless Port 192.168.0.21255.255.0.0 SSID: ...
ANPR Tattile Camera Screenshots
...
Static LPR Checklist - Tattile
Required fields are: IP Address NetMask Gateway DNS Server (8.8.8.8 can be used) Time Se...
Updating Tattile Camera Firmware
Justification for Firmware Updates There are two purposes behind updating the firmware of the LP...
Trobleshooting Tips
Powering the Camera If the camera is not connecting to the PL8RDR there may be issues with power...
Setting Up Your Survision LPR Camera
Note: this is assuming you have a PL8RDR computer already set up. See the PL8RDR information sect...
Static Camera Setup
Adding a Camera To begin go to the Violations menu and click on LPR and Chalking. Then click on ...
LPR Plate Lookups and Fuzzy Filtering
Background The OperationsCommander system has the ability for the system to map plates to new va...
Vehicle Counts
Audit Report To view the Audit Report gpo to the Parking Management Menu Item, hover over Licens...
Obtain GPS Coordinates
Using Google Maps Search location within Google Maps Zoom into the location as necessary Rig...