Adding Permits to a Lot

This article describes the process of adding permits to lots. Permits can be added individually or in bulk.

Quick Steps:

1. Hover over Parking Management then Lot Administration and click Allocate.
2. Find your lot (e.g., Example Temp Lot).
3. Click on Add Permits to Lot.
4. Enter permit numbers, ranges, or prefixes/postfixes.
5. Click Add Permits.
6. Confirm by clicking Add Permits again.
7. Check the confirmation message.
8. View the updated permits in the Permit Search utility.

Step-by-Step Instructions:

1. Navigating to the Permit Number Allocation page: Hover over Parking Management then Lot Administration and click Allocate.

2. Find a Lot: Find the lot you wish to manage. For example, Example Temp Permit.

3. Add Permits to Lot: Click on the Add Permits to Lot button.

4. Open the Add Permits Utility: The Add Permits to Lot utility will open. In this section, you can:

   • Add individual permit numbers (e.g., Staff01, Staff02).
   • Add a range of permit numbers (e.g., 1 to 20 or 50 to 200).
   • Optionally, add a prefix or postfix to the permit numbers (e.g., "Staff" in Staff01).

5. Click Add Permits: After entering the desired permits or ranges, click the Add Permits button.

6. Completion: A pop-up message will confirm that your changes were successfully made.

7. Check the Permit List: Once the permits are added, your lot will display them in the Permit Search utility.